Author: admin

Workshop

Workshop “Digital Twins For Aerospace”, Rome December 14, 2022

The University of Rome “Tor Vergata” will guest the workshop titled “Digital Twins For Aerospace“. The event is organized by Marco Evangelos Biancolini and Ubaldo Cella, respectively professor of Machine Design and researcher at the Enterprise Engineering department “Mario Lucertini”. Professors and engineers, active in EU research programs, from academic, industry and research institutions, will provide an overview the state of research on numerical tools and methodologies.

Digital Twins are virtual representations of physical objects used to predict how the final product will operatively perform in its lifecycle. The improvement of such numerical models is, in the aerospace field, decisive to design more and more efficient and greener aircrafts and rockets. The workshop focuses on the state of the art of digital twins to face aerospace design problems but also highlighting how other field of engineering benefits from the availability of methodologies able to efficiently model the physics involved in mechanical systems.

The workshop is addressed to students and engineers who want to be updated on aerospace technologies. The participation is free. People interested can attend the workshop at this link. For information contact Dr. Ubaldo Cella.

AGENDA

  • 09.00 – Registration
  • 09.20 – Marco E. Biancolini (University of Rome “Tor Vergata”),
    Welcome
  • 09.30 – Antonio Maglione and Ubaldo Cella (Vere Novo Technologies s.r.l., University of Rome “Tor Vergata”),
    From the drawing board to the Digital Twin: 40 years in aerospace engineering
  • 09.55 – Domenico Quagliarella (Italian Aerospace Research Centre “CIRA”),
    A mixed intrusive and non-intrusive approximation technique for efficient robust aerodynamic shape design
  • 10.20 – Mauro Minervino and Renato Tognaccini (CIRA, University of Naples “Federico II”),
    Induced Drag and Vorticity in Viscous and Inviscid flows
  • 10.45 – Agostino De Marco and Vittorio Trifari (University of Naples “Federico II”),
    JPAD Modeller, a knowledge-based geometric pre-processor for aircraft digital twins in preliminary design workflows
  • 11.10 – Coffee break
  • 11.40 – Viviana Ferretti, Pietro Tadini, Alessio Gizzi and Simone Porzi (AVIO),
    M10 cryogenic liquid rocket engine of VEGA-E upper stage
  • 12.05 – Giorgio Travostino and Paolo D’Alesio (Piaggio Aerospace),
    How the Digital Twin Defined the Wind Tunnel Arrangement for high lift systems: the Clean Sky 2 MOTHIF project
  • 12.30 – Giovanni Lombardi, Yuri Evangelista and Marco Feroci (Istituto di Astrofisica e Planetologia Spaziali “IAPS-INAF”),
    The role of high fidelity CAE multi-physics design at INAF
  • 12.55 – Gianluca Maglione (NATO Centre for Maritime Research and Experimentation “CMRE”),
    Digital Twin for autonomous vehicles: a prototype application for NATO maritime exercise
  • 13.20 – Closure session

December 14, 2022, 9.00 – 14.00
University of Rome “Tor Vergata”, aula Leonardo,
via del Politecnico 1, Rome
 
The event is organized with the collaboration of:
 

Springer leading global scientific publisher

Software vendor and consulting engineering

 

Design Methods
Aerospace engineering consulting

News

Flexible Engineering Toward Green Aircraft: CAE Tools for Sustainable…

At the end of 2017, the University of Rome “Tor Vergata” hosted the Flexible Engineering Toward Green Aircraft workshop. The objectives were to present the state of the art of research in the aerospace sector and to show the goals achieved by design and numerical analysis tools in support of aeronautical design. Professors and engineers from the world of research and industry gave an overview on themes as Aeroleasticity, Robust Design and Numerical Optimization. The seminar came at the conclusion of two European research projects in which the University of Rome “Tor Vergata” was involved: RBF4AERO and RIBES. In RBF4AERO, a multidisciplinary optimization platform based on mesh morphing technologies has been developed for the design of aircraft. The tool is able to face problems as fluid-structure interactions, ice growth and shape optimization. The platform was implemented on HPC also in the context of the FORTISSIMO European project. RIBES was focused on the increase of the accuracy of aeroelastic analysis methods based on coupling fluid dynamics and structural solvers. Furthermore, a significant part of the budget was dedicated to the realization of an experimental campaign of aeroelastic measurements in a wind tunnel on a realistic wing structure. The results of these two projects constituted the background for the event and gave the inspirations for the themes of the several presentations. The workshop was also followed remotely thanks to the university’s IT support.

The success of the event suggested to collect the contributions of the participants and to propose to Springer International Publishing the publication of a book based on the three topics of the seminar. The call for paper, which was not limited to the workshop participants, led to select ten quality papers that were subjected to a peer review process in which professors and researchers active in the field of European research were involved. The book, entitled Flexible Engineering Toward Green Aircraft: CAE Tools for Sustainable Mobility, was published last March in the series Lecture Notes in Applied and Computational Mechanics and was edited by the organizers of the workshop Marco Evangelos Biancolini and Ubaldo Cella. The book is opened by Paolo Colombo, ANSYS Inc.’s Global Industry Director of Aerospace and Defense, who provides a vision of the unexpressed potential of numerical modelling and a picture of the future scenario on software technologies in the field of aeronautical design.

Click here to purchase it!

Seminars

Seminar “Flow Induced Vibrations”

November 27th the University of Rome “Tor Vergata” will guest the seminar “Flow Induced Vibrations” held by Dr. Fabio Paglia from Avio SpA.

Detailed program:

– Introduction to Avio company
– Avio new product roadmap
– Launch vehicle Buffeting during ascent phase – transonic flow regime
– Launch vehicle Global Aero-elastic analysis and response to gust
– Launch vehicle Vortex shedding during standby on ground
– Solid Rocket motors: Pressure oscillations
– Wind tunnel tests, bench firing tests

The speech is planned from 11.30 to 13.15.

The flyer is downloadable here.

Call for contribution Workshop

Flexible Engineering – Call for contributions

Dear colleague,

December 14, 2017 the University of Rome “Tor Vergata” guested the workshop titled “Flexible Engineering Toward Green Aircraft“. The event focused on fluidstructure interaction numerical methodologies, robust optimization and aeroelastic experimental testing. The invited speakers provided the opportunity to highlight the state of the art on technologies related to the design of flexible structures in aerospace engineering with a focus on active researches in Europe. The possibility to follow the presentations online and the support of the EU commission, who gave visibility to the seminar through the channels of the Clean Sky programme media infrastructure, gave an international relevance to the event.

Following the success of the seminar, Springer International Publishing AG agreed to publish a book entitled “Flexible Engineering Toward Green Aircraft: CAE Tools for Sustainable Mobility” reporting a list of selected contributions to the topics the
workshop was focused on. The book will be indexed in all major citation databases (Scopus, WoS, etc). The selection of researches will be not restricted to participants to the workshop but is open to researchers proposing interesting, relevant and original works that are related to these subjects.

Your contribution will be highly appreciated.

These are some important dates for the submission:

  • submission of abstracts by authors (around 200 words): June 29th, 2018.
  • submission of final papers: September 21st, 2018.

Register and submit an abstract in the Springer system.

Templates for full papers are available for download from following links:

Sincerely yours.

Prof. Marco Evangelos Biancolini
Dr. Ubaldo Cella
Department of Enterprise Engineering “Mario Lucertini”
University of Rome “Tor Vergata”
Via del Politecnico 1, 00133 Roma
Tel +39 06 7259 7124
Fax +39 06 2021351

RIBES wing Workshop

Flexible Engineering

The workshop “Flexible Engineering Toward Green Aircraft” was yeld, December 14th, in Rome at the University of Rome “Tor Vergata”.
A webex connection was arranged to allow following the event online.
At the following links is possible to download the presentations:

Marco E. Biancolini (Associate Professor – University of Rome “Tor Vergata”),
FSI Tools atTor Vergata

Paolo Colombo (Global Aerospace & Defense Industry Director – ANSYS),
Digitalization of Aerospace & Defense

Emiliano Costa (Project Manager – RINA Consulting),
Reshaping the future of aircraft design

Fabrizio Nicolosi (Associate Professor – University of Naples “Federico II”),
Aeroelastic Experimental measurements on the RIBES wing

Ubaldo Cella (Senior Researcher – Design Methods),
High Fidelity FSI analysis methods and their validation within the EU RIBES project

Franco Mastroddi (Associate Professor – University of Rome “La Sapienza”),
Some issues and challenges on aeroelastic modelling and multi-disciplinary design of aero-space vehicles

Domenico Quagliarella (Head of the Multidisciplinary Analysis and Design Group – CIRA),
Robust Aerodynamic Design of a Supersonic Wing-Body for Natural Laminar Flow

Massimiliano Genta (Design Loads Engineer – Piaggio Aerospace),
Interaction between gusts and loads of highly flexible wings: the AeroGust EU project

Flexible engineering Workshop

Workshop “Flexible Engineering “, Rome December 14, 2017

The University of Rome “Tor Vergata” will guest the workshop titled “Flexible Engineering Toward Green Aircraft“. The event is organized by Marco Evangelos Biancolini and Ubaldo Cella, respectively professor of Machine Design and researcher at the Enterprise Engineering department “Mario Lucertini”. The workshop comes as conclusion of two EU funded research projects in which the University of Rome “Tor Vergata” was involved: RBF4AERO and RIBES. The aim is to present the status of research in the aerospace field and to highlight the recent achievements in analysis and design methodologies adopted in the aircraft design process. Professors and engineers active in EU research programs, from several academic, industry and research institutions, will provide an overview on topics as Aeroelasticity, Aerodynamic Robust Design and Shape Optimization.

RIBES logoRBF4AERO logoclean-sky logoSeventhFrameworkProgramme logo

Particular attention is addressed to fluid-structure numerical methodologies to face static and dynamic aeroelastic problems. In aerospace engineering, in fact, the flexibility of structures plays a crucial role in several aspects of design processes. The capability to evaluate the interaction between aerodynamic, inertia and elastic forces is important to avoid drag penalties, control system efficiency loss and generation of potentially dangerous phenomena as divergence, control reversal and flutter. A significant part of the agenda is dedicated to the progress of “high fidelity” CFD-CSM coupling and to the description of the recent experimental activities performed to support the validation of numerical Fluid-Structure Interaction analysis methodologies.

The workshop is addressed to students and engineers who want to be updated on the state of the art in aerospace technologies. The participation is free but people interested in attending the event are kindly asked to register or to contact professor Biancolini.

AGENDA

  • 09.00 – Registration
  • 09.20 – Marco E. Biancolini (Associate Professor – University of Rome “Tor Vergata”), Welcome
  • 09.30 – Paolo Colombo (Global Aerospace & Defense Industry Director – ANSYS), “The evolution of simulation for Aerospace & Defense”
  • 10.00 – Emiliano Costa (Project Manager – RINA Consulting), “RBF4AERO: Reshaping the future of aircraft design”
  • 10.30 – Fabrizio Nicolosi (Associate Professor – University of Naples “Federico II”), “Aeroelastic experimental measurements on the RIBES wing”
  • 11.00 – Ubaldo Cella (Senior Researcher – Design Methods), “High Fidelity FSI analysis methods and their validation within the EU RIBES project”
  • 11.30 – Coffee break
  • 12.00 – Franco Mastroddi (Associate Professor – University of Rome “La Sapienza”), “Some issues and challenges on aeroelastic modelling and multi-disciplinary design of aero-space vehicles”
  • 12.30 – Domenico Quagliarella (Head of the Multidisciplinary Analysis and Design Group – CIRA), “Robust Aerodynamic Design of a Supersonic Wing-Body for Natural Laminar Flow ”
  • 13.00 – Massimiliano Genta (Design Loads Engineer – Piaggio Aerospace), “Interaction between gusts and loads of highly flexible wings: the AeroGust EU project”
  • 13.30 – Open session

December 14, 9.00 – 14.00

University of Rome “Tor Vergata”, Aula Convegni Ingegneria,

via del Politecnico 1, Rome

 

The event is organized with the collaboration of:

 

ANSYS logo

Global leader in engineering simulation

 

RBF Morph

Software vendor and consulting engineering

 

Design Methods
Aerospace engineering consulting